Hangars
Our solutions in military hangars can accommodate any type of aircraft, from drones to the largest military aircraft in the world.
The Gaptek System allows the design and construction of permanent, semi-permanent and deployable hangars, using the same technology and all of them being demountable with different grades of reusability of materials.
Permanent hangars
The permanent hangars are the ideal solution to develop MRO activities due to their characteristics: they comply with the technical codes like any traditional building, but they have a reduced assembly time and a greater adaptability to any context.
Semi-permanent hangars
The semi-permanent hangars also comply with the technical codes as any traditional building, but their materials allow a greater degree of disassembly and the reuse of approximately 80% of the materials used in the first assembly.
Semi-permanent hangars
The semi-permanent hangars also comply with the technical codes as any traditional building, but their materials allow a greater degree of disassembly and the reuse of approximately 80% of the materials.
Deployable hangars
They are the solutions with the shortest assembly time and, in addition, they are 100% demountable and relocatable. All the materials can be reused, both structure and envelope, in the next assembly of the building.
A400M hangar Assembly video
Characteristics
All types of hangars depending on the degree of disassembly can be Model FLAT or Model ARCH.
Model FLAT
Specifications
Dimensions: Unlimited
Assembly time: *Depending on dimensions and demountability grade
Required cementation: Yes
Uses:
- Storage
- Executive aviation
- Hangar assembly
- MRO
- Painting
Structure:
- Structure assembly: Mechanical joints
- Material: High resistance alloy aluminum AW-6082-T6
- Warranty: 20 years
Standard Resistances:
- Wind Standard: 120 km/h
- Fire Standard: REI30
- Snow Standard: 0.75 KN/sqm
- Climate conditions: -20 ºC to 55ºC
- Earthquake Standard: 0.1 g
Envelope:
- Exterior: Corrugated metal sheet, high-resistance tensile canvas or insulating panel
- Interior: Rock wool sandwich panel
Certifications:
- ISO 9001:2015 in Quality Management System
- UNE-EN ISO 14001 in Environmental Management
- UNE-ISO/IEC 27001 in Information Security Management
- ISO 45001:2018 in Occupational Health and Safety Management System
- CE Marking in all materials, including EN-1090 in relation to steel and aluminum structures
Options
Plus Resistances:
- Hurricane Kit: up to 250 km/h
- Fire Plus: up to REI120
- Snow Plus: up to 3 KN/sqm
Hangar door:
- Sectional
- Sliding
Additional elements:
- Bridge crane
- Gaptek modules for workshops and offices
- PIT connectors
- Controlled atmosphere
- High efficiency air cooling system
- Additional doors for vehicles and staff
- Geothermal energy system
- Clearance lights
- Sprinklers
Additional services:
- Maintenance
- Life warranty with Gaptek maintenance
- Logistics
Applicable standards:
- International Building Codes
- Eurocodes
- Spanish Technical Building Codes (CTE)
- UFC
- NFPA
- RSCIEI
Model ARCH
Specifications
Dimensions: Unlimited
Assembly time: *Depending on dimensions and demountability grade
Required cementation: Yes
Uses:
- Storage
- Executive aviation
- Hangar assembly
- MRO
- Painting
Structure:
- Structure assembly: Mechanical joints
- Material: High resistance alloy aluminum AW-6082-T6
- Warranty: 20 years
Standard Resistances:
- Wind Standard: 120 km/h
- Fire Standard: REI30
- Snow Standard: 0.75 KN/sqm
- Climate conditions: -20 ºC to 55ºC
- Earthquake Standard: 0.1 g
Envelope:
- Exterior: Corrugated metal sheet, high-resistance tensile canvas or insulating panel
- Interior: Rock wool sandwich panel
Certifications:
- ISO 9001:2015 in Quality Management System
- UNE-EN ISO 14001 in Environmental Management
- UNE-ISO/IEC 27001 in Information Security Management
- ISO 45001:2018 in Occupational Health and Safety Management System
- CE Marking in all materials, including EN-1090 in relation to steel and aluminum structures
Options
Plus Resistances:
- Hurricane Kit: up to 250 km/h
- Fire Plus: up to REI120
- Snow Plus: up to 3 KN/sqm
Hangar door:
- Sectional
- Sliding
Additional elements:
- Bridge crane
- Gaptek modules for workshops and offices
- PIT connectors
- Controlled atmosphere
- High efficiency air cooling system
- Additional doors for vehicles and staff
- Geothermal energy system
- Clearance lights
- Sprinklers
Additional services:
- Maintenance
- Life warranty with Gaptek maintenance
- Logistics
Applicable standards:
- International Building Codes
- Eurocodes
- Spanish Technical Building Codes (CTE)
- UFC
- NFPA
- RSCIEI
FAQs
What structural materials are used by Gaptek?
Gaptek has developed a construction system based on prefabricated profiles and dry joints, using aluminum as the structural material for the advantages it has as opposed to traditional construction and its great adaptability.
The advantages of aluminum as structural material as opposed to steel are numerous, such as the optimization and customization of the profiles according to its specific use, as compared with steel’s standard and normalized profiles, the lightness of the profiles and its resistance, the low maintenance thanks to the anticorrosive properties of aluminum and its total recyclability.
What type of machinery is required for the assembly of the hangars?
Thanks to the lightness of aluminum profiles, the structural materials optimization and the simple assembly of our system using dry joints, it is not required to use very heavy machinery or large cranes to assemble our hangars. Only ordinary machinery such as lifting platforms and telescopic cranes.
What is Gaptek’s hangars fire resistance?
The structures of the hangars are protected against fire using inner lining of rock wool sandwich panels. Therefore, the degree of fire resistance will depend on the thickness of the panel and its own fire resistance, adapting the project to the specific regulation and the requirements of the hangar, without limits.
What is the durability of Gaptek hangars?
The materials used in Gaptek hangars, as well as in the rest of Gaptek products, have a great resistance and durability, similar to traditional construction systems. Gaptek offers a 20 year guarantee according to the structure and 5 years to the rest of the elements that compose the hangar.
I want my hangar to be energy efficient. Is it possible?
Yes. In fact, all Gaptek solutions minimize in a passive way the intervention of machines to reach comfort and energy efficiency. In addition, our system is totally compatible with the installation of renewable energies such as solar panels and geothermal.
Are Gaptek hangars resistant to extreme weather conditions?
Gaptek buildings are designed to withstand the conditions of the places inhabited by 85% of the world’s population, but they can also be designed for the most extreme climates of the planet. An example is the Gaptek warehouse that was built in Antarctica.
Gaptek is a synonym of trust
Reduced construction time
Our solutions are predesigned for a quick on site assembly
Turnkey solutions
From the design and production to the construction and maintenance of the buildings
Predefined quality
All constructive elements comply with CE marking and undertake quality controls
Energy efficiency
Passive systems are incorporated for major energy savings
Low maintenance
Minimum maintenance thanks to the aluminum structure, even in aggressive environments
Scalability
Extensible solutions thanks to the use of the modular architecture principle
Your demand, our duty.
Information request form
Last posts
Spanish Air Force Marfil Detachment infrastructures contracted by NSPA to Gaptek
Among the international commitments undertaken by the Ministry of Defense of the Kingdom of Spain are the support to various organizations and countries in the African continent. One such support is provided by the “Ivory Detachment”, which has been operating a C-130...
Gaptek will exhibit life-size products at FEINDEF in Madrid
Gaptek will present its construction system and its innovations at the International Defense and Security Fair (FEINDEF), which will be held for the first time in Madrid from May 29th to 31st. In our large exhibition space we will show our products on a real scale,...
UAV hangar, support buildings and communication towers for the NSPA
We are proud to announce the finalization of the first project contracted through the NSPA, the NATO Support and Procurement Agency. The project consists of the delivery of deployable support buildings for the new unmanned aerial vehicles (UAV) of the Air Force of the...